YX75-200-600 Hot Dipped Galvanized Roofing Sheet Q235 Q345 40–275 g/m² for Industrial Roofing and Building Cladding Applications

YX75-200-600 Hot Dipped Galvanized Roofing Sheet Q235 Q345 40–275 g/m² for Industrial Roofing and Building Cladding Applications

1. Product Overview

YX75-200-600 hot dipped galvanized roofing sheet is mainly used in industrial buildings, warehouses, and general building cladding systems. In these applications, roofing and cladding materials are typically required to provide basic corrosion resistance, structural stiffness, and stable installation performance.

Typical issues include:

• Corrosion under long-term outdoor exposure
• Insufficient profile stiffness affecting roof span suitability
• Inconsistent dimensions reducing installation efficiency
• Limited stability under rain and wind load conditions

Therefore, product selection should consider coating level, profile dimensions, thickness, and service environment together.

2. Technical Solution

This product is manufactured from hot dipped galvanized steel sheet and roll formed into the YX75-200-600 profile. The zinc coating provides basic corrosion protection, while the profiled structure improves bending stiffness and roofing performance stability.

Key technical characteristics include:

• Zinc coating range: 40–275 g/m²
• Wave height of 75 mm helps improve structural stiffness
• Pitch of 200 mm supports roofing layout and drainage
• Effective width of 600 mm supports standardized installation

This structure is suitable for general industrial roofing and cladding systems.

3. Specifications

This product is mainly suitable for:

• Industrial roofing systems
• Warehouse roofing and cladding
• Agricultural roofing
• Light steel structure buildings
• General building cladding systems

It is more suitable for projects focused on roof covering, cladding installation, and basic corrosion resistance.

5. Processing / Usage

Typical application steps include:

• Select zinc coating according to service environment
• Choose thickness based on span and load requirements
• Roll form galvanized steel into the YX75-200-600 profile
• Cut to custom length according to project needs
• Install with screws onto purlin systems

In practical roofing projects, overlap design, waterproof details, and fixing methods should also be evaluated together.

6. Advantages

• YX75-200-600 profile provides good structural stiffness
• Zinc coating of 40–275 g/m² meets general roofing corrosion resistance needs
• Defined effective width supports standardized installation
• Custom length production is available
• Suitable for regular industrial roofing and cladding applications

7. How to Choose

The following points are useful when selecting this product:

• Q235 is suitable for general industrial roofing applications
• Q345 may be evaluated when higher strength is required
• For outdoor service, select an appropriate coating level within the Z120–Z275 range
• For larger spans or higher load conditions, increase sheet thickness
• If surface appearance matters more, minimized or zero spangle may be selected

8. FAQ

Q1: What does YX75-200-600 mean?
It means the roofing profile has a wave height of 75 mm, a pitch of 200 mm, and an effective width of 600 mm.

Q2: Why is Coil ID not listed on this page?
Because Coil ID is a parent coil parameter, not a finished roofing sheet parameter. This page is for the finished profiled sheet.

Q3: Is this product suitable for automotive or home appliance manufacturing?
No. This page should not be positioned for automotive or appliance use. YX75-200-600 is a roofing/cladding profile and should stay focused on building applications.