Custom Cut Q235 / Q345 / SS400 914mm - 2000mm Hot Rolled Steel Coils / Coil

Custom Cut Q235 / Q345 / SS400 914mm - 2000mm Hot Rolled Steel Coils / Coil

1．Product Overview

Hot rolled steel strip is used where narrow-width steel is required for further slitting, profiling, bending, and general strip-based fabrication. This product range is supplied as hot rolled strip rather than wide hot rolled coil, so it is more suitable for applications that need narrower widths and easier secondary processing.

The available range covers 1.0–5.0mm thickness and 30–630mm width. Coil weight is around 0.7–5MT and coil ID is 508mm, which fits common strip handling and recoiling routes.

2．Technical Solution

The strip is supplied with mill edge or slit edge according to downstream processing requirement. For narrower-width production, slit edge is used where edge control matters in recoiling, profiling, or further fabrication. The minimum slit width is 30mm.

The grade system includes JIS G3131 SPHC, SAE1006, SAE1008, GB/T 700 Q195/Q235/Q345, and DIN1623 ST12. This allows the strip to be matched to different market requirements and forming routes while keeping the product within a hot rolled strip specification.

3．Specifications

4．Application

This material is suitable for strip processing routes that require hot rolled substrate in narrow widths. It can be used for recoiling, slitting, bending, profiling, welded strip blanks, structural strip components, and other fabricated strip parts where medium-gauge hot rolled strip is more practical than wide coil.

5．Processing

The strip can be supplied with mill edge or slit edge according to the downstream route. It is suitable for recoiling, slitting, cut-to-length conversion, bending, and general forming. For narrower strip production, slit width should be controlled above 30mm.

6．Advantages

The 1.0–5.0mm thickness range is suitable for medium-gauge hot rolled strip applications. The 30–630mm width range supports narrow strip processing rather than wide-coil routing. Mill edge and slit edge options allow the strip to match different processing routes, and the coil build is practical for standard strip handling and secondary conversion.

7．How to Choose

• Choose SPHC when the application follows general JIS hot rolled strip logic.
• Choose Q195 or Q235 when the route follows GB-based general commercial strip use.
• Choose SAE1006 or SAE1008 when the downstream process is aligned with SAE-based material routing.
• Choose slit edge when final narrow-width processing and edge control are important, and choose mill edge when original edge condition is acceptable in the downstream route.

8．FAQ

Q1．What is the thickness range of this hot rolled steel strip
The thickness range is 1.0–5.0mm.

Q2．What is the width range
The width range is 30–630mm.

Q3．What is the coil ID
The coil ID is 508mm.

Q4．What is the coil weight range
The coil weight is around 0.7–5MT.

Q5．What is the minimum slit width
The minimum slit width is 30mm.