25 MT ASTM A36, SAE 1006, SAE 1008 Hot Rolled Steel Coils Metal Coil Roll

25 MT ASTM A36, SAE 1006, SAE 1008 Hot Rolled Steel Coils Metal Coil Roll

1．Product Overview

Hot rolled steel strip is suitable for narrow-width processing where a wider hot rolled coil is not necessary and where strip dimensions need to match downstream forming, slitting, or fabrication routes. This specification covers thickness from 1.0mm to 5.0mm and width from 30mm to 630mm, with mill edge and slit edge options for different production requirements.

2．Technical Solution

The product is supplied as hot rolled steel strip in coil form with 508mm coil ID and around 0.7–5MT coil weight. For slit strip supply, the minimum slit width is 30mm, which supports narrower-width routing for profiling, bending, and secondary processing. Grade coverage includes SPHC, Q195, Q235, Q345, SAE1006, SAE1008, and ST12, allowing selection by market requirement and downstream process route.

3．Specifications

4．Application

This material is suitable for strip processing routes that require hot rolled substrate in narrow widths. It can be used for slitting, bending, profiling, welded strip blanks, structural strip components, and general fabricated strip parts where medium-gauge strip is more practical than wide hot rolled coil.

5．Processing

The strip can be supplied with mill edge or slit edge according to downstream requirement. It is suitable for recoiling, slitting, cut-to-length conversion, bending, and general forming. For narrower strip production, slit width should be controlled above 30mm.

6．Advantages

The 1.0–5.0mm thickness range is suitable for medium-gauge hot rolled strip applications. The 30–630mm width range supports narrow strip processing rather than wide-coil routing. Mill edge and slit edge options allow the strip to match different processing routes, and the coil build is practical for standard strip handling and secondary conversion.

7．How to Choose

• Choose SPHC when the application follows general JIS hot rolled strip logic.
• Choose Q195 or Q235 when the route follows GB-based general commercial strip use.
• Choose SAE1006 or SAE1008 when the downstream process is aligned with SAE-based material routing.
• Choose slit edge when final narrow-width processing and edge control are important, and choose mill edge when original edge condition is acceptable in the downstream route.

8．FAQ

Q1．What is the thickness range of this hot rolled steel strip
The thickness range is 1.0–5.0mm.

Q2．What is the width range
The width range is 30–630mm.

Q3．What is the coil ID
The coil ID is 508mm.

Q4．What is the coil weight range
The coil weight is around 0.7–5MT.

Q5．What is the minimum slit width
The minimum slit width is 30mm.